How Much Does a Concrete Edging Cost?
This guide will discuss the cost of concrete garden edging including labour and supply expenses. It will also explain how long the time to install is for various concrete stone edging.
Additional costs, as well as the cost and process for removal of concrete edging will be discussed.
There are various kinds of concrete edging including round edge, bull-nosed edge, flat top, half batter, and even certain decorative garden edges.
Flat top concrete edging can cost about £3.50-£4.50 per linear metres.
They can be set flush to your lawn, allowing an easier mowing process and can also be placed upright to create an edging that is low.
Round Top concrete edging can be somewhat more expensive at £7.00-£9.00. This kind of concrete edge is more likely to be employed as an upright border for a pathway or to create a barrier between the grassed area from the flower beds.
The half-batter concrete edge comes with an slanting edge and the price for the edging is between £8 and £13. The edging is mostly used to kerb and line the edges of driveways.
Concrete lawn edging with decorative design comes in a variety of designs, including the rope top, scalloped edge as well as embossed patterns. The cost of the average is around £7.50 – £20 per linear meter. They’re typically used to indicate the path or flower bed boundaries.
What are the Costs of Supply to purchase Concrete Edging?
If you are planning to put concrete edging stones into your garden for an easy DIY project, you’ll be able to determine the cost for you to buy the stones.
The price for concrete edging is only the cost of the edging stones. It doesn’t include labour or installation costs.
In the beginning, you’ll need to determine the length of distance you would like to cover. It could be along both sides of the driveway, or a path or even to divide different areas in your yard.
A precise measurement is essential to properly budget your project. Be sure to budget an extra amount for cuts and breaks.
A typical flat top driveway edging made of concrete can run approximately £3.50-£5.50 per linear millimetre. They are rectangular concrete blocks that can be laid out in lawns for a clean edge.
Round Top concrete garden edging features more rounded lines. The average price is £7.00-£9.00 per linear millimetre. The concrete lawn edging creates an obstacle to stop grass from encroaching on flower beds, and also creates a clear line of boundary.
Concrete half batter kerb edge has an slanted top that can be used as a driveway edging. The price per metre of linear is in the range of £8.00-£13.00 on an average. They can also be used to create concrete paths to create edging.
Concrete edging costs for larger decorative pieces are around £7.50 – £20.00 based on the style. There are embossed styles, scalloped edging, waves or rope tops and other designs. They can be used as concrete path borders or flower beds.
What are the Additional costs of the Edging Installation in Concrete?
In addition to the concrete edging costs as well, you’ll need to account for additional costs. There are tools and materials needed to set up concrete edgings in your yard or along your path or driveway.
Type 1 Sub-base
Type 1 is mostly made of crushed stone. It gives a firm foundation for the concrete edge. It will make sure that the ground is level and keep the concrete edge from sinking further to the soil.
The typical bag that weighs 800 kg can cover about 50 linear meters with 50mm in depth and cost on average £50-£60. Bags of 25kg or less can be purchased for £4.00-£6.00 and cover about 2 linear metres up to 50mm in depth.
Ballast
Ballast is made up of sand, sharpness and gravel, or stones. It creates a bed for those concrete stones to rest in, giving stability and solid foundation. A large bag of ballast can cover about 90 linear metres with 50mm depth.
The cost of ballast is roughly £50-£65 per bulk bag. 25kg bags which cover around 2 linear metres up to 50mm are priced at £2.50-£3.00.
Cement
Cement is mixed into the ballast to form concrete, which the concrete edge will be set within. Without this mix the concrete edging may move, or be swept away by gardening equipment or vehicles. A 25kg cement bag costs between £5 and £6.
Cement Mixer Hire
To mix ballast and cement, you’ll require a cement mixer. Mixing by hand can be difficult and takes a lot of time. Better mixing is made by using a mixer.
If you don’t have an existing mixer, it is possible to rent them for between £14 and £20 per day. Diesel, petrol, or electric cement mixers are available to hire all over the UK.
Skip Hire
To install your lawn’s edging made of concrete, you’ll have to dig up soil from your yard. Of course, the amount you take away will be contingent on the size of the edge you plan to install and you’ll have to dispose of this dirt in some way.
The simplest method for you to do this is hire the skip. A mini-skip of 2-4 yards will cost between £100 and £120 to hire, whereas the larger skip of 6-8 yards will cost you between £250 and £275.
Tradesmen Costs for Laying Concrete Edging
For those who aren’t keen on installing concrete edging in an DIY project, or who don’t have the time, it’ll be necessary to employ an expert tradesperson to install the work for you.
You can hire the services of a landscape gardener or general handyman to put in your concrete edging, based on the nature and the size of the job.
Hourly Rate
The cost of landscaping gardeners is £25 to £30 per hour. A handyman in general will be charged between £20 and £30 for an hour, depending on the area you are located in the United States. The price is for labor costs only and does not comprise any other materials.
When the concrete edge is a part of a redesign of your garden and you are looking for a landscaper, a landscaper is likely to be a great option. If you are planning to install concrete kerb edging on your off-street parking it is likely that a handyman would be the better choice.
Daily Rate
A landscape gardener can typically earn £110 –£180 per day, based on the region. A general handyman can make £175-£200 a day.
The bigger jobs will take more time and might need a tradesperson or additional workers to mix concrete, for instance. The additional labour could cost between £80 and £100 per day.
How Long Does it Take to install Concrete Edging?
If you’re paying a contractor to install concrete edging around your yard, the length of time this will be an appropriate inquiry to inquire. The length of time will impact the cost for those who pay by the hour or by the day instead of the fixed cost.
The timelines for this work will depend on the scope of the undertaking, i.e., how big an installation you’re planning for if you plan to line the entire length of a driveway. This will require more time than just edging a garden path, for example.
Incorporating 50 linear meters of flat-topped concrete driveway edging can take as long as four days. There’s a lot of preparation to be accomplished in addition to the foundation that will require time to cure.
20 linear metres of round-top concrete used to divide a flower bed from a lawn will take between one and one-half or two days from beginning to the end. Installing concrete edging retroactively between flower beds and lawns will require a lot of preparation work as well as digging.
The installation of the concrete for 30 metres edging using Half battered concrete units is likely to require two days. Making sure everything is level and aligned is essential for kerb installation.
Concrete path edging with decorative design is the highest price point for concrete edging costs. It is usually employed in smaller runs within the garden, separating areas of lawn such as flower beds, or an edging for a water pond. A 10 meter long installation can take anywhere from 6 to 8 hours.
Other factors could affect the setting of driveway edging made of concrete or decorative concrete edgings within your yard. In the event that it is extremely wet, it may not be possible to install the edging into your concrete garden bed.
It is the same if it’s very cold. If temperatures drop below freezing, concrete could end up being permanently damaged.
The table below shows the average time to install different concrete edging designs in your yard.
| Type | Dimensions of Project | Time Frame |
| Flat Top | 50 linear meters | 4 days |
| Round Top | 20 linear meters | 1.5 days |
| Half Batter Half | 30 linear meters | 2 days |
| Decorate | 10 linear meters | 6-8 hours |
Types of Concrete Edging
Concrete edging can be used to divide gardens, define areas as well as protect flower beds. They give a neat and tidy appearance to your garden as well as the property.
The kind of concrete edging you choose to use will be based on your requirements, budget and the size of the space which needs to be filled. This article will discuss various types of concrete edging that are available, as well as their pros and cons.
Flat Top Concrete Edging
A flat-top concrete border is constructed of concrete that has been pressed and can be utilized in many landscaping projects. It can be laid in a straight line to create an edge to lawns that allows the grass to cut with no trimming the edges.
Additionally, a flat top concrete edging is also a good option to mark a raised border or driveway boundaries.
The flat top cost of concrete edging varies from £3.50-£5.50 for a linear meter, depending on the provider. The cost of these edgings can vary depending on where in the UK you reside and also on the different suppliers and manufacturers.
It is the cheapest of the types of concrete edges that are covered in this guide.
The cost of labour to put in 50 linear meters of concrete flat top edges will range from around £1,000-£1,100. This will take four days at a daily average of between £250 and £275.
The timeframes can vary based on the scope of your project as well as the weather conditions and availability of the materials.
Pros
- Flexible
- Cost-effective
- Practical and durable
Cons
- Industrial looking
Round Top Concrete Edging
Roundtop, also known as bull-nosed concrete edging, is extremely durable and is ideal for holding back dirt and stones like pebbles or gravel.
The smoother lines of this edging create a less industrial look as compared to its flat-top counterpart It can also be used in a variety of garden projects. The concrete edging looks great in all gardens, as a boundary for zoning or as a path edge.
Round Top concrete edging is a great choice for useful applications for use in gardens. It is a great option to mark a path for walking. It is able to separate grassed areas from driveways or even surround a pond in the garden.
The clean lines of this piece look great in any garden and won’t look out of its place in either a modern or traditional home.
The price for concrete edgings with the bull-nosed or rounded top edge is about £7.00-£9.00 per linear millimetre. Different colours like red or buff may be more expensive than a typical grey version.
For 20 linear meters, the cost of labour for concrete edgings with the bullnose or rounded top is £375-£415.
Pros
- Multiple uses
- Priced reasonably
- More soft lines as opposed to flat tops.
Cons
- Not the most appealing edging
Half Batter Concrete Edging
The half-batter concrete edge features an angled edge that makes an efficient kerbing option. The edging is made by the hydraulic press process, which makes the edging extremely hard wearing and long-lasting.
The concrete edging can be used to its best advantage as a driveway edging. It is non-slip.
The elegant appearance of half-batter concrete edges is contemporary and professional. It provides a sleek and effective line of demarcation for driveways, hardstandings or other landscaping elements that you have in your backyard.
This concrete edging could be combined with a variety of contrast or complementary materials to create a stunning garden pathway or driveway.
Concrete edging costs for half batters start at £8.00-£13.00 per linear millimetre. There could be regional variations and differences between manufacturers in the price.
Costs for labour to install 30 linear metres of half battered concrete edging is around £500 to £550, with certain areas in the UK like London and London, costing more.
Like any outdoor project the weather could disrupt schedules, so cost of labor could increase when work is delayed.
Pros
- Effective kerb edging
- Durable
- Practical
Cons
- The landscaping is limited to only a few uses
Decorative Concrete Edging
Concrete edging that has a decorative style adds a distinctive element to the traditional landscape or a pathway. Options like rope edging along with scalloped and embossed designs are readily available depending on your preferences.
This kind of concrete edge is better suitable for older homes or homes that are more traditional. It is used to define paths or define certain zones.
Concrete edging with decorative design can also be employed to safeguard flowers by stopping grass from invading the borders.
The concrete cost for this style of decorative edging is in the range of £7.50-£20.00 in accordance with the style and design.
There are many options to pick from, including rope top edge, scalloped edge or wave edge, or embossed Tudor roses.
The installation of 10 linear metres in decorative concrete would cost you between £120 and £240 for labour costs. These antique and rustic edge designs complement many traditional and historic homes.
Pros
- Design options
- Multiple uses
- Protects against grass encroaching on flower beds
Cons
- A bit expensive
- Dated
What is the cost to Remove Concrete Edging?
Despite its popularity as a material that is durable concrete can be degraded due to a variety of reasons and concrete edge is not any different.
In the event that it is in contact with the elements, continuous water intrusion can trigger chemical reactions, which could cause internal expansion in the concrete, causing hairline cracks.
Rainwater, or water from other sources can enter the cement via these cracks. When temperatures drop below 0 degrees the water freezes and expands inside these cracks.
This results in the formation of larger cracks until eventually the damage becomes irreparable.
There could be times that you’d like or need to take down concrete edges. It could be because the edging has become worn-out and in need of replacement or perhaps you need to install a new type of edging.
Certain older homes may have an older-style border or edging for the path that must be removed or replaced. Although some individuals are content to tackle this task on their own while others prefer hiring someone to do the work.
The price of concrete edges being removed from the driveway or garden is between £150 and £250 per day, or between £20 and £25 per hour. The cost is based on the labour for the removal of all concrete edges, but not disposal.
Based on the amount of concrete edging you have to eliminate and how much concrete edging you need to dispose of, you may have to employ the services of a skip. The cost for hiring skips will differ according to the location you live in and the size of the skip you choose to use, and if it’s being placed on the roadway or your property.
In general, a small skip of a few yards is priced between £100 and £120 to hire. But, a bigger capacity 6-8 yard skip can cost between £250 and £275.
If your skip sits located on your land it won’t require permission, however when it’s going to be onto the road, the local authority has to approve.
It is usually arranged with the skip hiring firm while the price of the permit will be passed directly to the consumer.
In the event that the quantity of concrete edge you’ll need to get rid of isn’t enough for the use of a skip, you could bring it to the local recycling center in your vehicle or on a trailer.
A lot of recycling centers do not permit vans to dispose of rubbish since they view their commercial vehicles as. But, you may be allowed to enter when you have a smaller trailer.
FAQs
Q: How do you cut concrete edging?
A: Concrete edging can be cut with an angle grinder which is fitted with a special stone cutting disc. Do not try to use a metal cutting disc on concrete as it will not work.
When cutting concrete edging with an angle grinder, draw a line across the piece that you want to cut. This makes it easier to create a straight and even cut.
Q: Where can you use concrete edging?
A: Concrete edging can be used in many landscaping projects around your property. It can be used to define spaces in your garden, section areas off, surround a garden pond or edge a driveway or path.
Q: Can I install concrete edging as a DIY project?
A: Installing concrete edging as a DIY project is relatively straightforward, although it is a physically demanding job, so it may not be possible for everyone.
The process involves digging a trench for the edging, laying a level line, putting a bed of concrete in the trench and then placing the edging in the trench, ensuring that it is level.
Cuts may need to be made for some pieces. A supporting layer of concrete or ‘haunching’ in front and behind the concrete edging then keeps it in place.
Q: Are straight lines the only option for concrete edging?
A: It is possible for different shaped boundaries to be achieved using concrete edging. Of course, straight lines are the easiest to install, but you can also have curves, arcs and circles.
These will involve more planning and take longer to complete, but the end result will be worth it.
Q: When should concrete edging be replaced?
A: If your concrete edging shows signs of deterioration, then you should consider removing it and replacing it with new edging.
Damaged edging can be dangerous and can cause a trip hazard. It will also look unsightly. It may be possible to just replace the damaged parts of the concrete edging and leave the rest in place.
