How Much Does It Cost to Install an Outdoor Tap?
Outdoor taps also have the benefit of being able to be put in an adjacent garage, if you want. This makes it simpler for connecting the pipe to the tap using the storage area for hose pipes eliminating the need to carry a heavy hose.
We will review the different prices to install an outdoor tap so that you are aware of what to expect.
An outside tap installation could cost between £80 to £150 depending on the kind of tap as well as the area it’s installed. It will cost approximately £80 to £150 to install it in the kitchen sink wall and around £180 or £250 for it to be installed on another wall.
Installation of an exterior tap on the bottom of the garden is more costly, with costs starting around £300 plus.
If you choose to put your garden tap on a different wall in the home, you’ll require complex plumbing work. This can cost you as much as £1000 or more, depending on the size of the plumbing work that is required.
The closer the tap in relation to the pipe for water, the more water pressure at the tap.
It is also possible to install the tap as a separate feature wherever you want to. However, it will require plumbing to allow water to flow correctly into the tap. The water pipes that connect to the standalone tap must be positioned at a lower level than the ground to prevent freezing during winter.
The cost for installing an outside tap will vary based on the region you live where you are in the United Kingdom. London’s labour costs are substantially more expensive than those of northern regions of the United Kingdom. For those who live in London labour costs could make it more expensive to install an outside tap.
Costs will ultimately be decided by
- The position for the tap.
- How far is the source of feed water away from your tap?
- What number of taps would you wish to install?
- The tap type you pick.
If you choose to install an electronic tap lock or a protected box that locks it will result in identical.
If you approach an experienced plumber in your area to install a tap outside you can expect him to give a quote nearly immediately since this is a fairly typical or common request. Regarding labour and work costs generally, it will take one or two hours.
Outdoor Tap Prices
The table below breaks down the prices of outdoor taps:
| Job | Cost |
| Outside tap installation | £80 – £150 |
| Kitchen sink wall installation | £80 – £150 |
| Installed on a different wall | £180 – £250 |
| Outside tap at the bottom of the garden | £300+ |
| Different wall | £1,000 |
What are the Supply Costs for an Outdoor Tap Installation?
If you’re planning to put in an outside faucet you’ll have to purchase the fittings and pipework and PTFE tape as well as a drill sufficient to pass into the wall. The cost shouldn’t put the price higher than £60 and £80.
We’ll discuss the costs of supplying an outdoor tap in case you decide to make it your own. It will be easy to get everything you require.
The price of an outdoor tap on its own can vary from £6 and £10 on an average. A bib tap is priced somewhere between £15 and £30 and the cost of a standard tap is somewhere between £5 to £20.
An thermostatic valve generally costs between £20 to £50. A backplate is priced anywhere between £5 or £15.
The price of the materials typically ranges from £14 or £20 If you’re within a couple of meters of the main water source. Outdoor tap kits are available.
A kit for outdoor taps includes an outdoor tap, as well as everything you require to install it. The kits for the garden typically range from £20 up to £30.
The cost of the materials are only a small portion from the overall cost for the project. Based on the costs discussed the majority of the cost to install an outside tap lies in the cost of labour.
It is possible to look into buying the outdoor faucet kit through a trusted retailer. This is less expensive than buying the individual parts usually priced around £20 and £35 However, be sure you do your research prior to purchasing and ensure that the product is in compliance with British Standards.
You must possess a quality drill that can drill holes into walls of masonry. For the copper pipe of half-inch through, you’ll need to make use of a hammer drill to create a clear hole.
After you’ve finished drilling your pipe hole, it is now time to make holes to install the screws to secure the tap onto the wall. Once the hole is completed then you’ll need to insert the appropriate quantity of wall sockets.
Wall plugs can be found in a variety of hardware stores. Then, connect your tap onto the pipe making use of PTFE tape to make an extremely strong connection.
The stop can be temporarily covered by tape. Place the pipe into the hole following the placement of the gasket of rubber over the tap. The gasket of rubber will form a seal to the wall.
If you have to cut the pipe after putting it into the hole, simply cut it in squares with the help of a pipe cutter, then smooth the edges with a file. Other tools can be employed however pipe cutters are your best alternative.
Connect the other part of the hose with the copper pipe. Before beginning, make sure the tap is off. After that, using the tools that come with the tap kit ensure that the hose is tightly secured until it is connected to copper.
The costs for supply will be outlined in the below table:
| Supply | Costs |
| Overall | £60 – £80 |
| Bib tap | £15 – £20 |
| Standard tap | £5 – £20 |
| Thermostatic mixer valve | £20 – £50 |
| Backplate | £5 – £15 |
| Garden tap kits | £20 – £35 |
What are the Additional Costs of Fitting an Outdoor Tap?
There are a number of things to think about in determining the cost of installing a tap outside in order to determine if they will affect the budget.
This section we’ll discuss the different additional expenses that could make a difference to the overall price of your installation.
Garden Waste Removal
The price of the removal of garden debris ranges between £70 to £200. The price, on other hand, is determined by the size of your garden as well as the amount of trash that has to be removed.
Recycling green garbage is believed to be between £100 to £150. The same is true about brown trash removal. The cost of removing soil waste is around £0.15 per kilo.
If you’re a homeowner with a small volume of waste from your garden that has to be cleared away regularly, check whether your local municipality offers an assortment service for garden waste. The service is either completely free or costs from £150 and £200 each year.
Some companies for removing garden waste will charge you based on the weight of the garbage. When you’re dealing with a higher waste disposal need or combining services, you could reduce the costs per ton.
In the end, if you employ a service to clean up your rubbish, heavier items like bricks and dirt are charged according to their weight.
Create a House
The United Kingdom, the average cost for cladding a home can be anywhere in the range of £1500 to £2100. For external cladding, covering the entire wall of a gable roof home with a timber cladding can cost between £1300-£1600, £1300 and £1600 with stone cladding, £1300 to £1700 using uPVC Cladding, and £1400–£1600 for metal cladding.
The cost of covering a wall in the roof of a gable house is approximately £1600-£2000 for a terraced residence and £3100 to £3500 for a semi-detached home and £5800–£7200 for a detached house and £725-£1025 in the case of an apartment contingent on the size of the house and type.
The labour cost for rendering on the exterior side of a semi detached house is around £780 to £2250. The installation cost of cladding will be approximately £300-£600 for the entire wall of an average gable roof.
The labour cost for rendering a brick wall that is 5m2 in size can range from £190 up to £380, with prices between £760 and £1140 in the case of a terraced home and £1140-£1710 for a semi-detached or semi-detached property and £1330-£1260 for a detached home and £50-£200 for apartments.
A joiner or a renderer typically cost somewhere between £130 to £250 per day or £16 to £31 each hour.
The location of the Tap
If you require the tap to be installed on a wall that is not that directly in front of the kitchen sink (which is the most common spot for an external tap) then you’ll require more work to be done for example, more pipework being installed or, in certain cases floors having to be removed and then reinstalled in order to accommodate the pipes (if you, for example, the sink is on an island in your kitchen).
It is suggested that if you suspect that your installation could be complex, you seek the visit of your plumber prior to committing to the job to ensure they are able to assess the plan and provide an accurate estimate for the work to be carried out.
Thermostatic Valves
The cost of installing a hot or cold tap is the same; however, an outdoor hot water tap is also not temperature-controlled and will necessitate the installation of an additional thermostatic valve if you do not want to risk scalding.
This is a crucial aspect to consider in homes where children are present and may need to utilize the faucet. Each thermostatic valve is priced about £20.
Access to Information
If the plumber arrives and has to spend time taking objects out of the way of accessing the tap installation area You will be charged for their time. It is essential to make the area ready for a tradesperson who has been hired prior to their arrival, if it is possible.
Location
Based on where you live where you live, the cost to install the tap in your garden varies. The majority of garden services are higher priced within London or the South-East than those in regions in North or West regions of the UK. Of course, bigger garden service firms charge more for their services than local self-employed gardeners.
Tradesmen Costs to Install an outdoor Tap
The majority of the time the cost of labour can have a significant impact on the total cost of your project. So, you may be interested in knowing how much it would cost to pay someone to set up an outdoor tap.
In this article, we’ll go over the various labour costs that are included in the installation of an outdoor faucet so that you are aware of what to expect.
The cost for hiring a plumber is contingent to where you reside in the country as well as the kind of service you offer. Based on our research it is estimated that the average plumber will charge from £40 or £80 each hour.
The day rate for plumbers ranges between £180 and £350 per day. However, you should anticipate paying 20-30 percent more per day when the plumber is installing appliances in your home.
A majority of plumbers can install an outside tap on the external wall that is adjacent to your kitchen, assuming it’s straightforward, costing about £40-£60 per hour. The equivalent £80 to £120 on labour costs for larger jobs typically costs between £30 and £100 depending on the location and access.
The median cost for a basic installation of a garden tap was £100.
It is possible that accessing the site could increase the cost in particular if your plumber requires moving furniture in order to reach the tap site. So make sure that any furniture or other obstructions are taken off the site and that the stopcock is in place prior to when the plumber arrives.
The fittings needed to put the tap onto your “kitchen sink” wall will cost you £115. If you would like to place the tap to be installed in a non-convenient position (with no internal supply pipework) the cost could be between £210-£300.
Make a new manhole, and connect it to an existing manhole in order to put in a tap on the doorway to the back. A building inspector is legally obliged to oversee this. This means that it will require two labourers and price in the range of £875 or £900.
For a garden tap to be installed, it must be in the middle of your garden. Two labourers are required to “surface and run” the pipe, and then to let it freeze each winter. These costs are between £345 or £400.
The procedure mentioned above, using the pipe supply being buried at 900mm below the surface to avoid freezing. This could require two people and could cost £1175.
Prices can vary based on the location you reside within the United Kingdom. Cost of living is higher in London and in the southeast is usually higher than other regions of the country.
The final cost for plumbing is determined by travel and transportation along with the accessibility of your home, as well as any fees or charges related to parking their car in your home.
The table below breaks down tradesmen’s outdoor tap installation costs.
| Labour | Cost |
| Plumber | £40 – £80/hour |
| Plumber day rate | £180 – £350 |
| Standard outdoor tap installation | £40 – £60/hour |
| Larger outdoor tap fitting | £80 – £120 |
| Installing a tap to wall “kitchen sink” wall | £115 |
| There is no pipework in the supply pipelines that would be adjacent to the installation of taps | £210 – £300 |
| Make a new gully and connect it to a manhole that is already in place. | £875 – £900 |
| Garden tap located at the at the bottom of the garden | £345 -£400 |
| Pipeline supply buried 900mm beneath the surface | £1,175 |
How Long Will It Take to Install an Outdoor Tap?
In the majority of homes installing an outside faucet is straightforward however the most challenging part being drilling a hole in the wall on the outside for the pipe to go through.
Because the mains water source is usually drawn from the cold faucet on the sink, it’s typically the most convenient to install the outside tap on the wall that is outside of the kitchen.
This will ensure that you receive sufficient water pressure with a hose. The tap has to connect to mains water supply instead of a tank-supplied gravity feed. So, the installation of a tap for outdoor use is essential to do it correctly and can take some time.
However, how long will it take to install an outside tap?
As a rule of thumb the majority of plumbers will be capable of installing an outside tap on the wall, which is located next to the kitchen in a couple of hours if the procedure is straightforward.
If you are dealing with an even more complex task such as installing a water supply, and then using a water supply from a different part of the home and installing an outdoor mixer tap it may take longer however, it’s feasible to finish.
It generally takes “half an hour” to set up a faucet to your “kitchen sink” wall. However it is possible to place the tap to be in a difficult position (with no supply pipework) it might take all day.
This task requires two workers and two days to put the tap in front of the door to your back, create an entirely new gully, then connect it to the existing manhole. For a garden faucet, you must install it on the bottom of your garden. When it is possible to “surface connect” the pipe that supplies water and allow it to freeze each winter, it would take two people a day to finish.
The process was described previously, but with the supply pipe placed just 900mm beneath the surface to stop freezing. It can take two workers four days.
The table below breaks down the time required to install an outside tap.
| Job | Duration |
| To set up an outside tap to your exterior wall | 1- 2 hours |
| To put a tap in wall “kitchen kitchen sink” wall | Half an hour |
| To install a tap at an internal pipework supply location. | One day |
| Installing a tap outside of the back door | Two days |
| To set up a garden tap in the middle of the garden | One day |
Types of Outdoor Taps
Aren’t taps just taps? Do they not all do exactly the identical thing? What exactly is the main difference between inside and exterior counterparts? Their internal workings, however, differ significantly in comparison to their exterior counterparts. Why? because there’s no shortage of hot water within this home.
However they should be able to withstand extreme weather conditions without getting sick or causing havoc in the winter.
There’s several outdoor taps to pick from. This article will cover the different types of outdoor taps, and their advantages and drawbacks.
Traditional Outdoor Taps
The compression valves of the past are the ones most people are used to (unless you are in a cold climate, where they’d be useless).
If you rotate the handle left, it allows the water from your home to flow through the opening of the faucet. Therefore turning it in the opposite direction will shut the faucet and bring the water to a stop.
Pros:
- Affordable
- Simple to make use of
Cons:
- Not recommended for countries with colder temperatures.
Frost Proof Outdoor Taps
If you live in a place that is extremely cold, these are your ideal. The traditional compression valves (such ones we have discussed) can’t withstand extreme frost, snow, or cold winds. This is why their frost-proof cousin was invented.
They utilize a tube made of metal which extends inside your home or an outbuilding to keep the water and cause damage to your valves or pipes. If the tap is shut off, it is able to keep hot water at a sufficient temperature to keep it from freezing.
If it’s correctly placed it will allow the water to drain out and leave no water inside the pipe, which could cause harm.
If you open a frost-proof water faucet and the water can take a few seconds before it can be released. This is normal and is due to the valve being situated higher in the pipe than conventional faucets.
Pros:
- Great for countries that are cold
Cons:
- It is prone to break if it is not kept in good condition.
Bib Outdoor Taps
These are the most commonly used kinds of outdoor taps that can be used in homes and are called ‘hose bibs with threads on their ends which allows them to be linked to a pipe for a hose.
If it is rotated the internal valve for compression prevents all flow from water. The handle turning to the left opens the valve, which allows for water flow to the spigot as changing it back to right turns the valve downwards and shuts off the nozzle that compresses to shut off water flow.
These taps for outdoor use are usually placed on the back of a home’s backyard, although they could be placed in front or on the sides of the property in certain situations.
They’re an ideal spot to wash your hands after a long day in the garden, or filling up a watering container to water plants. Hose bibs that have threaded heads that can be snagged onto the hosepipe makes it easy to water your lawn, or clean your car.
Other irrigation systems for the garden like sprinklers can also be connected to a hose bib using a pipe. The bib taps are typically constructed of metal or plastic and the material of their construction will have an effect on their cost.
The most economical spigot could be brass, zinc or steel. While the most costly will be an ABS or die-cast aluminum bib.
The major drawback with the outdoor faucets is that they don’t perform well in cold weather as they’re not weatherproof. There is a possibility of water remaining in the faucet, which freezes in cold temperatures, which can cause damages to the faucet while the freezing ice expands.
Pros:
- Simple to make use of
- It is possible to connect it to hoses of different sizes
Cons:
- Not recommended in cold temperatures.
- Expensive
Ball Valve Outdoor Taps
The type of tap can be located both in and out of structures. In the home, it’s typically utilized for shut-offs for plumbing since the method it uses keeps any amount of water from entering or flowing out. It can be turned off or on and there is no middle ground.
Ball valve faucet takes its name because of being able to regulate the flow of water with the use of a ball.
Within the tap is a hole where the ball will sit. If the handle is turned into the on position, the ball will be moved to the side and the hole opens to allow water to flow through.
Once the handle has been twisted until it is off, the ball is rotated to the opposite direction, then the opening is then plugged to keep water out of the.
This kind of outdoor tap is common in backyards since different levels of water flow aren’t required to maintain landscaping. A simple ‘on’ or an off switch is sufficient.
They are typically attached to the exterior of a home and connected with the pipes for water. Ball valves are generally constructed of brass and are quite affordable to buy.
Pros:
- Control of the water
- Simple to utilize
- Affordable
Cons:
- There aren’t all styles
Anti-Siphon Outdoor Taps
The taps are equipped with a mechanism that stops water from returning to the home through the water pipes once it has gotten to the outside faucet.
If you are using your home’s water taps to drink it’s recommended to ensure that the faucet in your outside area is not syphoning to stop contaminants from entering your kitchen faucet.
If the water in the outdoor tap, it’s susceptible to bacterial contamination or dirt that can be introduced into the water supply through the mouth of the spigot. If the water is able to return to your home and then into the pipes which supply the water you drink You could be making or drinking water that has been contaminated.
This is why some officials require residents to install an anti-siphon tap for the tap outside their property.
If you have an outdoor faucet that isn’t anti-siphoning You can easily modify it to stop backflow of water. You can simply purchase a screw-on anti-siphoning valve, commonly referred to as a vacuum breaker to do this. The valve simply screws on the spout of the faucet and turns it to an anti-siphon tap.
Pros:
- It is prone to bacterial infection or dirt
- Installation is simple and easy to do
Cons:
- Expensive
What’s the Cost to Remove an Outdoor Tap?
A tap outside may have to be taken off at times such as in the event of a problem or you’re planning to build an extension to your home within the area to which the tap is. No matter the cause, this will be an easy task for your local plumber or construction tradesman to finish.
If you require a replacement the plumber will remove and replace the existing tap. This is accomplished by grabbing the spanner that extends on the faucet’s neck and twisting it. Gripping may be needed to secure the wall mount in case the joint is tight.
If you choose to complete the job yourself, a new tap is expected to be priced approximately £10 and £15 most of the time. A plumber could do the job for as low as £30 to £50.
If the external tap has to be removed completely The tap will be removed by the same method. Inside, the pipework connecting to the tap has to be taken out to ensure the water is not contaminated the system.
Since the process is expected to take less than one hour, a labor cost in the range of £40 to £60 can be expected.
FAQs
Q: How do you fix a leaking outdoor tap?
- Loosen the packing nut with the adjustable wrench and remove the valve stem)
- Using your flat-head screwdriver, remove the screw at the valve’s end
- Using the screwdriver, carefully remove the old washer after the screw has been removed
- Using the brush, clean the washer seat to remove any residue that has clung to it before inserting the new washer
- Tighten the screw
- Apply plumber’s tape to the faucet threads for a secure fit, then replace the valve. Use your adjustable wrench to tighten the packing nut
Q: What height should an outside tap be?
A: Install an outside tap at least 50 cm above the floor, with enough space underneath for a large bucket or watering can. It is also critical that the outside tap is higher than the point at which it is connected to an existing water pipe in the house so that it can be drained in the winter to prevent freezing.
Q: Is it easy to install an outdoor tap?
A: Using a complete kit is the simplest way to install or fit an outside tap or garden tap.
Q: Does an outdoor tap need a drain?
A: Outside taps do not need a drain, but they should have adequate drainage below. It is best to practice installing or having a nearby drain.
Q: How do you keep an outdoor tap from freezing?
- Close the shut-off valve inside
- Turn off the water supply
- Wrap the outside faucet in insulation
- Cover the faucet with an insulated cover
- Remove the garden hose as well
