Introduction to Mitre Saws
Miter saws are a tool that is used to complete a variety of jobs but its main function is cutting crosscuts and mitres on a workpiece. It’s used for trimming baseboards, door trims, and crowns as well for cutting and framing moulding.
Mitre saws can be the tools that are most commonly used for these tasks for cutting out the joint or cutting off a small portion to ensure the proper fit.
In this article we will provide you with more information about mitre saws. We will also discuss the purpose of them and how they can be used. What do they do? The different kinds of mitre saws and the need for one for your home or work.
This guide will provide the top mitre saws on the market and the best places they can be found.
What is a Mitre Saw?
Mitre saws began as an instrument operated by hand with circular saws that were suspended from rollers. Mitre boxes are three-sided boxes that are used to hold the wood piece.
The manual mitre saw is now most often replaced by a powered mitre saw tool like those made available from SGS Engineering. The power tools are more effective and convenient when it comes to completing the same task. This type of power tool is the most efficient for mitre saws.
The cutting capabilities of a mitre-saw is perfect for tasks which require high accuracy for example, the assembly of decking for outdoor use. The corners of the decking need mitre cuts.
How do you Use a Mitre Saw?
For virtually any carpentry task for any carpentry job, a motorised mitre saw is an essential tool. This section focuses on the basic mitre sawing techniques along with techniques and tricks to achieve the most effective results.
- In order to align the cut, raise the blade guard using your thumb, and then look across the blade. Take your fingers off the switch while you align the cut to ensure your security.
- To make mitre cuts more precise for the perfect fit, change the blade’s angle. The blade adjuster should be pushed into its position and then hold it until the lock handle has been secured.
- Make a jig to hold crown mouldings in the right angle. Determine the location on the stop putting the moulding scrap upside down inside the jig. Connect the stop and the jig by screws. Make sure that all fasteners are away from any blade’s route.
- If you must cut mitres off pieces shorter than 8 inches you should cut them off the larger piece, so that your fingers are not in the blade’s path.
- After that, while you are holding the longer end make a mark on the other mitre, then alter the angle of the mitre saw and cut the 6-in. piece. A lot of saws have a large gap in their fences which allows small pieces to pass through and smash or even be tossed across the space.
Types of Mitre Saws
The size of the mitre saw blade needed for the task you’re doing is one of the most crucial aspects to think about. Knowing what size of saw you’ll require will make it simpler for you to make precise crosscuts through the wood.
Mitre saws can be utilised in order to make straight cuts into timber and wood. The cut’s depth is controlled by the size of the blade and whether it comes with an adjustable base. If you’re looking to learn more about the various types of mitre saws available, keep going.
Standard Mitre Saw
Mitre saws are the most basic kind of mitre saw. It has the blade mounted on an arm attached to the base, and the capability to make bevel cuts that range between +45 deg and -45deg degrees.
A standard or basic mitre saw’s main job is to make angle cuts. However, it is able to cut lengthwise or rips depending on the size of the blade.
Naturally, for any moulding, framing or woodworking job using a mitre saw that is geared to angled or crosscuts is vital. A basic or standard mitre saw can also be referred to by the name of a mitre.
While basic mitre saws are made in order to make for an angled cut the majority of mitre saws are available in sizes that range between 10 and 12 inches, and come with an adjustable scale.
Compound Mitre Saw
The saw’s arm can be easily adjusted to either the left or right, which allows more intricate cuts. This makes them perfect for skirting joints, boxing in, as well as MDF work.
The size of the cut is one of its major advantages. The saw is able to make a more solid cut when contrasted with other kinds of saws. But, it needs power to run. If power is cut when you’re working on a project, you’ll not be able to use the device.
Before you begin your project, you need to wait for energy to return. This also affects the ecology. The tool is no container for wood chips and dust.
Sliding Mitre Saw
Mitre saws are also able to slide out on rails. Mitre saw rails can be useful as they increase the cutting length and enable the use of larger pieces of wood.
The larger materials, like decking, countertops, board and sheet goods are great for this. This mitre saw that slides can accomplish everything an ordinary miter saw can accomplish, and it comes with rails that permit you to move the saw back and forward.
They’re, on the contrary, more expensive. The sliding mitre saw may not be required in the event that you’re unsure of the kind of work you’ll end up doing. They will require a larger space than the compound mitre saw.
Sliding Compound Mitre Saw
The main difference in a sliding compound see and compound mitre is the rails or rails that slide on the slide saw. The rails let you move the saw up and down.
The saw is equipped with all the features associated with a compound. It allows you to cut through larger materials. In the event that you’re dealing with a task that requires bigger boards, this can prove useful. Woodworkers who deal with heavier materials frequently choose to use the sliding mitre or compound saw.
A slidable compound mitre-saw is the best way to go if you’re not going to be cutting larger boards or only require the mitre saw occasionally. This type of saw usually gives you the power of cutting you require, but at a lesser price.
Double Bevel Mitre Saw
With a left and right tilt twin compound mitre saws have the ability to bevel both ways without needing to flip the piece.
It is possible to make one cut at a time, then slide the moulding back, turn the blade towards the opposite side, then make the second cut, without flipping over the moulding. This is a great feature to cut odd angles from leg furniture pieces, bracing as well as other pieces.
Dual compound sliding saws for mitres are much more modern and adaptable than traditional mitre saws. They allow them to be adjusted to a variety of angles. However the dual compound sliding mitre saw is believed to be more costly.
Best Mitre Saws
Mitre saws are an excellent tool to cut angles in metal, wood or even plastic. Mitre saws are well-known for their precision and the majority of high-end models are able to cut almost every angle that is left and right.
Additional features to look out for in a mitre-saw include a work light with LED as well as a laser for seeing precisely where the cut will be made, as well as dust extraction options, such as the ability to connect the vacuum cleaner or extraction device.
If you’re trying to purchase a mitre saw Here are some of the most highly-rated models.
Best Standard Mitre Saws
Makita LS1040 Mitre Saw
Makita is a company with a lengthy tradition of manufacturing mitre saws and this experience is evident in every one of their models.
The saw comes with an upgraded dust collection system, which means your office will be spotless and tidy. This is essential when you’re trying to arrange your workplace and keep it clean for a long period of time. This is a highly recommended saw due to its excellent quality.
- Good quality
- Dust collection included
- Reviews claim it’s loud.
With an estimated capacity of 31.5 pounds the Bosch GCM18V-18V-08N 18V cordless 8-1/2 mitre saw offers the most power for the size of its. A 210-degree crosscut at 90 degrees is able to handle an 3-5/8”- crown that is nested. The saw mitres up to 47 ° in each direction, which results with 45 degree bevel cut.
Its Bosch Core18 batteries and brushless motors provide cordless performance. More than 350 2x4s are cut using a single 8.0Ah battery. The saw is equipped with an automated laser guide system to aid you in aligning the cuts.
- Good battery
- Reviewers say it’s very loud when used.
Delta Cruzer 10-Inch
Delta Cruiser 26-2241 Delta Cruiser 26-2241 is an ergonomic and user-friendly design. Since this dual lever is located on its front, you won’t need to move around for it to change its position. The saw also features a comfortable, curved grip as well as a large trigger that operates by either hand.
Since it can tilt between two directions and moves along tracks, it is able to make enormous slices and cuts any angle. Its frame is constructed from military-grade aluminium and supported by 18 sturdy bearings. This makes it extremely robust.
- Ergonomic design
- Not recommended for small projects.
Hitachi C10FCG 10″ Mitre Saw
In the no-load mode In no-load mode, the C10FCG is driven by a 15-amp motor that rotates at speeds of up to 5000 RPM. This model is ideal to cut 2-inch dimensions of lumber, baseboards and for trimming.
The main disadvantage is that it’s only an ordinary mitre saw, without the sliding motion, which limits the size of the boards the saw can be cut with one run.
- There are no features included.
Evolution Power R255SMS
It is powered by an engine that produces 2000 watts, which ensures an average speed of 4,500 rpm for blades of 10 inches that have 28 teeth. It can cut a maximum width of approximately 12 inches (300 millimetres) and it can produce cutting cuts on both sides that measure 300-30 millimetres.
This port for dust removal measures approximately 38mm wide. The price and angles depth adjustment that are made available, will please those who are interested.
- Excellent design and construction
- High cutting capacity
- Some features were hampered because of the cost.
Best Compound Mitre Saws
VonHaus 1400W Mitre Saw
Most of us will need a mitre saw to complete an easy project and won’t require one for a long period of time. This model is ideal for the user who needs it. It isn’t an iconic brand and certainly not the strongest model available on the marketplace, however it does get the job done easily and efficiently.
It is able to cut to a maximum depth of 5.5cm and should be sufficient for the majority of people who are installing new skirting boards, or other small pieces of woodwork in the home.
The warranty is among the most crucial aspects. It doesn’t matter if purchasing an inexpensive saw should not affect the amount of protection you’ll get.
- Ideal for jobs with a small budget.
- Reviewers say it’s hard to use.
Einhell Compound Mitre Saw
The carbide-tipped blade of this machine can cut through the most tough materials, making cutting wood an easy task. For your added security, Einhell has included a two-year guarantee.
Einhell mitre saw is equipped with clamps which make it much easier to fix the saw to the workbench. You can be sure your mitre-saw will remain securely in place even when you’re operating at various angles using a variety of dimensions and forms of wood.
- Two-year warranty
- Secure and easy to lock
- Users claim it’s very loud when used
Evolution Power Tools Compound Mitre Saw
A carbide-tipped blade is able to cut aluminium, steel wood, nails embedded in wood or plastics, among other materials. It has a powerful 1200W gearbox as well as a blade system that can cut through a range of materials, while also extending the lifespan of the blades and motor.
40-45-degree bevel, 45-45-degree mitre setting, as well with a maximum crosscut capability of 125×55 inches are just a few of the capabilities of precision cutting.
- Cut precisely
- Some reviews suggest that the quality isn’t high.
Tall sliding fences come in the DHS790AT2. Since they can accommodate crown mouldings of up 7-1/2 inches in height and base mouldings that are up to 6-3/4 inches, when they are placed in a vertical position against tall fences which is very useful.
The cutting technology of Cutline creates the shadow of the blade’s shadow on the material, showing the exact width of the blade and the direction it will travel through during the cutting.
- Fences with tall slicing edges are also included.
- It demonstrates where you can cut easily
Dewalt DW715 is a single compound mitre saw that has an inch carbide blade that measures 12 inches and an impressive 15 amp motor which spins at 4000 rpm when it is not being used. It can cut through all kinds of mouldings and framings.
The blade is long and thin enough and it has enough power to perform any cross- and bevel cuts.
- It is able to cut through all types of materials.
- It is thin, so it’s not ideal for every job.
Best Sliding Mitre Saws
Dewald DWS774-GB 216-MM Slide Mitre Saw
The brand new Dewalt DWS774 mitre saw sliding is an amazing and contemporary tool that has all the features we want in a mitre-saw at the price of a product that’s competitive with the latest low-cost brands available on the market. Dewalt is typically associated with more expensive and high-end expensive tools. The DWS774 shatters expectations by mixing Dewalt quality with a lower cost.
The design of this saw was to allow quick movement from one job from one task to another. Remember that many slide mitres have large heavy machines. The DWS774 is an excellent design due to its tiny dimensions and grip handles.
The modern design of yellow and black offers this model a completely fresh look and feel giving it the appearance and feel as if it’s an entirely new piece of equipment.
- It is easily transferred quickly
- Good design
Single Bevel Sliding Mitre Saw
Mitre Saws are perfect for projects that require an excellent finish and many precise cuts. Professional carpentry tools are typically needed for large-scale DIY projects. Bosch is a top brand to look into for reliability and high-end quality.
It provides better dust control to ensure a cleaner and healthier living space. It is vital for those who use the Bosch mitre saw often. The rooms can become quite crowded due to dust, which is unhealthy to breathe. It is possible to keep your workplace as clean as is possible using this professional equipment.
- High-end finish
- Dust can turn into lots
Metabo KGS216M 1500 Sliding Mitre Saw
It includes bags for collecting chips to keep the work area tidy and neat. In small spaces or areas that have carpets and furniture is beneficial. The mechanism that slides on this saw allows it to use larger pieces of plastic or wood and makes it a flexible tool.
It’s easy to guide the cut using the aid of a laser. Since the laser is observed from a work position it’s simple to make the cut in the right direction with no need to bend. Since a large portion of the work these saws perform is to cut visible wood in order to finish the house it is vital to be precise.
- Chip collection bag included
- Easy to follow
- The sound is loud when used
Ryobi 10 Amp Sliding Mitre Saw
The 7-1/4 of the saw is introduced by the slide mitre. The can be used in a variety of ways, which makes it perfect for projects that you can DIY at home. This is the game-changing tool that can make every one of your outdoor initiatives a huge success.
The motor’s heavy-duty 10 amp rotates at up to 5,350 RPM, giving you the force to cut through hard wood or produce a variety of cuts. It comes with an 1-1/4-inch dust port that helps ensure your workspace is neat.
- Keeps workspace tidy
- Heavy to use
The sliding mitre saw comes with more than 48 teeth TCT blade which spins at 5000 rpm and is able to swiftly go through large quantities of materials. This is a variable saw that has five pre-set mitre stoppers to left and up to 45 deg bevel in order to determine the most suitable angle to complete the task.
Dust bags, extension arms and a hex key to make adjustments are also included.
- Dust bag Included
- Reviewers say it’s not the highest quality.
Best Sliding Compound Mitre Saws
Makita V Slide Compound Mitre Saw
This Makita can make the crosscut of 305mm, and has a greater choice of mitring options than Einhell as well as the Draper Mitre Saws. The capability to use integrated grips to keep long workpieces is among our favourite aspects of the Makita’s LS0815FL.
The LED lights for work and laser guidance together make cutting much easier and quicker. This is where it shines most, particularly when it comes to finishing a bevelled cut.
- LED lights
- Easy to use
Dewalt Sliding Compact Mitre Saw
The saw is exceptionally well-constructed and extremely weighty (it has a weight of 56 pounds). The 12-inch blade glides across the track easily stopping 10 times in order to ensure rapid accurate cutting. The boards up at 6.75 inches wide can fit with sliding fences.
The only downside is the absence of the ability to use a laser, however, the price is lower than this. The DWS779 is a superior option if you don’t require the use of a laser to accomplish your task. The saw comes with a three-year limited warranty.
- Good quality
- Quick to use
- Doesn’t include a laser
VonHaus Sliding Compound Mitre Saw
It is capable of cutting at a speed of about 4200 RPM. It is quiet. It’s impossible to go wrong using this model with an uncut measure of 140 x 40 millimetres and bevel cut measurements to the left of 20 x 120 mm.
Its powerful cutting power allows woodworkers to work more efficiently and quicker.
- Dust collector included
- Price to quality deters users from purchasing
The adaptability of this unit is highlighted by the mitre angle adjustment feature, which puts it ahead of its competitors by allowing it to make precise cuts.
The simple-to-read laser guide and bright, long-lasting LED lights which are included in this mitre saw are outstanding attributes. It’s not a problem to be concerned about the quality of the product, that’s why you don’t need to be concerned about it becoming damaged at the worst moment, requiring you to repair its components.
- Two-year warranty
- Dust collector is included
- It is difficult to keep clean.
Evolution Power Tools
The slide mitre saw is fashionable, adding to the overall look of your workshop, while accomplishing the task. This saw is the ideal choice for maximum performance, with a maximum width of 200mm and a blade width that is 8.5 inches.
Its powerful 1200W motor enables it to cut with precision and precisely. It can produce around 4,000 RPM, which allows you the ability to make precise cuts. need.
- Features Included
- Cuts perfectly
- The dust collector isn’t included.
- Gets blunt quick
Best Double Bevel Mitre Saws
DEWALT 12-Inch Double Bevel Sliding Compound Mitre Saw
A belt-driven 15 amp motor is capable of spinning at 3800 RPM on the mitre saw. It’s a beautiful Detent Plate made of stainless steel that has 10 positive stops to increase accuracy.
It comes with an extensive sliding fence that holds up seven-1/2″ in material which makes it perfect for larger projects such as crown moulding. It is equipped with a DeWalt 12-inch blade that’s immediately ready for use.
- Easy to use
- Good precision
Makita Dual-Bevel Mitre Saw
The movement of the sliding is controlled by a distinct rail system. It can be used in tighter areas because the rails run aligned with the saw instead of being stretched behind it.
The built-in laser is a very popular feature that lets you make fast and precise cuts. Dust collection holes as well as an impressive, detachable gate system are part of the.
The rails appear to be slightly off-centre and this could be the reason. This could quickly become an enormous issue, particularly when your use increases.
- Ideal for small spaces.
- Dust collection is included
- Rails aren’t the square, which could cause the cause of
BOSCH Power Tools Dual-Bevel Sliding Mitre Saw
The saw is huge at 88 pounds, however it comes with a degree of durability to match. The foundation is extremely sturdy and will not cause any damage to your equipment.
With the push-button, the saw can also be set to a detent override feature. The detent override setting allows you to choose instantly any angle that is adjacent that allows you to work quicker.
It’s not suitable to be folded or transported due to its size and weight. heavy. If you’re using it for work it is almost always necessary to have assistance and that can be a hassle.
- Very solid and stable
- Always have someone to assist you while making use of
Excel Double Bevel Mitre Saw
If you’re looking to complete a DIY project It’s a powerful 2000W motor that has the 0deg to 45 deg mitre right angle. It’s a compact design that has an angled double bevel. It comes with two horizontal steel rails that have linear ball bearings. It’s ideal for softwood, hardwood laminates or coated panels.
- Small design
- Good for different materials
- Reviewers say it’s not as effective as they expected
Einhell Dual Drag
Laminates, wood and plastic can all be cut using this Einhell The TCSM-2131/1 Double Drag, Crosscut, and Mitre Saw. Accurate mitre cuts and precise crosscuts to length are achievable by using the crosscut, drag, along with the mitre.
To ensure maximum flexibility when placing mitres along two sides, the head of the saw can be continuously tilted towards the right and left. It is possible to cut extremely wide pieces of workpieces by using the drag function.
- This saw is able to be tilted.
- It is also possible to be crosscut
- Reviewers have said that the quality of Mitre Saw isn’t the most effective.
Best Compact Mitre Saws
Blades and motors that spin this are both the primary elements of the cut. You can create a different ending to the story if you are using this motor.
While Bosch’s CM8S appears to be heavy, its upper handle is remarkably mobile. At the work site it became one of the easiest to manoeuvre saws. When it is connected to an extractor for dust it also gathers lots of sawdust.
- Dust collector included.
- It’s difficult to carry
This high-end hybrid corded/cordless mitre saw blends the power, precision capacity and features, if you have the money for it. It brings together individuals with the highest level of proficiency and an established track record of producing high-quality work.
If you don’t need this degree of precision, there are plenty of alternatives.
- Good precision
Milwaukee’s 2733-20 mitre saw offers two options for bevels. On both sides it has cam locking detents and it can mitre 48 degrees in both directions.
The cutting capacity for the vertical is 3 1/2”, with the base placed against the fence. The crown nested capacity is 2-5/8 1”. Remember that the blade of this saw measures 7-1/4 inches! It is also able to cut an angle of 28 degrees at a 90-degree angle.
Apart from that the instrument is incredibly light and weighs only 28 pounds! A light-readable cut line indicator with LED is also provided. Overall, the performance of this top mini mitre saw that is cordless and has a cutting trim has delighted our team.
- It is possible to be cut with a 90-degree angle
- Not a good choice for large jobs.
Craftsman Sliding Mitre Saw
The Craftsman Saw is the pinnacle of efficiency and precision. It comes with a voltage of 20 units, and it can turn at a speed of 800 rpm. This means that it is easy to operate and provides great balance and control while processing wood pieces.
- Blade wears away because of speed
Kobalt Compact Sliding Mitre Saw (PS189 Lowes)
This tool is a small compound mitre saw that’s known for its toughness. It’s ideal for mouldings as well as general wood processing in professional settings. There aren’t many aspects to master and the overall user experience is simple. Don’t fret when you’re not able to use a mitre saw fully.
- Not recommended for large-scale projects.
Best Portable Mitre Saws
Evolution Power Tools Compound Saw (PS179 Amazon)
A top clamp for solid materials, an extended support bar that can hold workpieces of up to 3m, as well as an end stop to allow quicker repeat cuts on fencing and decking projects are all in the accessory box included with this tool. The maximum load is 150kg which is remarkable considering its size.
- Fast cuts
This includes steel dents which are flexible and long-lasting. allows you to quickly establish an angle for mitres, and it is the XPS the shadow line indicators lets you to set the blade with precise precision.
A clamp for workpieces will hold your materials in place and a 60-tooth blade designed to remain razor-sharp over the longest time frame, can effortlessly cut through wood.
You’ll be in complete control of your cutting by using five different speed settings and an electronic stop and a dust bag to ensure your workspace is neat and tidy.
- Dust bag comes with
- Five different speeds
Makita MLS100 410 V
With speeds of 4,200rpm the electric saw powered with a strong 1500w powered by a 230V motor that provides ample cutting power to cut through a variety of wood and other substances.
Mitre saws can die when they are pushed to their limits However, Makita has ensured that this saw has enough power to ensure it’s not overloaded when cutting hard materials.
- Excellent features for the price.
- It is easy to store
- No laser guidance.
This light mitre saw is safe from particles and dust that could otherwise hinder the operation of the tool, due to the non-brush design. It’s powered by a removable battery which you can use based on the power requirements of your needs (8 Amps/12 Amps).
Be aware that batteries aren’t included in the instrument, and have to purchase them separately.
- Accurate sliding
The XSL05Z model is a combination of design along with portability and performance in a single package. It has an LED display which shows the battery’s current state and is completely protected from overloads.
It also has an attractive, tiny LED lamp that is integrated inside the handle, which can be adjusted to provide additional control.
- Powerful battery
- The gauge scale fills up in time.
Best Lightweight Mitre Saws
Delta Power Equipment 10-Inch
The saw is very light, with a weight of just 30 pounds. It has extensions for tables, which allow you to work on large objects from any location. The saw also features an LED which you can turn off or on for better cuts.
Their top-quality, reliable tools and equipment is well-known. Their S26-263L slide compound saw is compact, light and durable, featuring an 15-amp motor.
- It is able to work on large objects
- Laser feature that can be turned off or on
- It’s not a good choice for jobs with large amounts.
Bosch Professional Biturbo
The mitre saw that is cordless is truly a beast. It comes with the same cutting power as the 1,600 Watt corded version, but with a 216mm blade with an unbeatable cutting power, however it weighs 16 kg when the battery is fitted.
- Simple to transport around
- Easy to use
- Cuts can only be made in only one direction.
The quality of the construction is excellent and has a sturdy aluminium base that gives durability and strength on the blade, which makes it appear very sturdy, despite its light weight at 16.5 kg.
The motor is 2,000 watts and runs at 4,500 rpm with no load, to power the 10 inch (255 millimetre) blade that is enough for the majority of wood-cutting jobs.
- Features Included
- Excellent value for the money.
- Not an easy task to clean
- The laser appears dim.
With its transparent blade guard it is possible to monitor the blade. With the integrated laser, this is a great choice for those who are just beginning to learn. It’s safe to use as the clamps keep your workpiece in place and it’s a breeze to work with mitre angles due to the lock.
- Easy to use
- Locks into angles
VonHaus Sliding Compound Mitre Saw
The VonHaus mitre-saw is worth a look if you’re seeking a reliable and affordable mitre saw to use for your everyday DIY projects. The power mitre saw that slides is a sliding compound. the saw is constructed of top-quality materials that operate smoothly due to its sliding mechanism and bearings.
- Dust bag included
- Not good for big projects
Best Budget Mitre Saws
Stanley Adjustable Mechanical Mitre Box
The base of the saw is constructed from precision die-cast iron. It features a replaceable blade that has extremely precise universal teeth, 14 TPI, which has been specifically hardened and tempered.
The saw comes with an adjustable screw for tensioning blades to make adjustments to the blade simple and also to give a clean sharp cut. It has a smooth operation and support for the saw and an automatic guidance system. Mitres can be adjusted to 30 degrees and 45 degrees. It can also be adjusted to 60 degrees as well as 90°.
- The reviews say it’s not of a good quality.
Tolsen Mitre Box & Fine Tenon Saw
This saw was designed for cutting skirting boards however, it is also able to be employed for other mitre tasks too. It’s among the most cost-effective options in the United Kingdom.
The mitre box is equipped with the guideline for cutting straight lines as well as a guide to create 45-degree angles. A fine-tuned saw measures about twelve” in length, and o.9mm thick, and has the ratio of 13 teeth to an inch.
- It comes with a step-by-step guide to make straight cuts.
- It is only suitable to cut skirting boards.
Stanley Wood Metal Saw
The saw was made specifically to slice skirting boards however, it is also able to be used for other mitre works also. It’s among the most affordable available in the UK and has holes that allow it to be mounted on a bench or table.
The mitre box includes the guideline to cut straight lines, as well as the guideline to cut 22.5or 45-degree angles. While the saw is excellent however, remember that it is the plastic version of the box.
- It includes a manual
- Good end
- Made of plastic
Draper 21307 Mitre Saw
By choosing the bevel as well as the mitre angle cuts are uniform and precise each time. It can be folded down to fit smaller work areas, meaning you don’t need to fret about storage. The dust collection bag keeps it tidy while you work. Handling workpieces is safe since the clamp is able to hold it securely in the right position.
- Easy cuts
- Dust bag for collection included
- Reviews have said it’s loud.
Silverline SW05 Mitre Saw
A robust pressure table saw that comes with nine mitres pre-set, and is a great price for money hand saw for precise cuts. It’s ready for use from the moment you receive it, as it comes with a saw blade and is covered by a life-time warranty.
- Ready to use
- Blade blunts quickly