Home Pick

A Complete Guide to New Toilet Cost Installation

Do you want to know more about the costs involved in the installation of the latest toilet?

This guide will walk you through the cost of replacing toilets which includes different toilet types costs, prices for toilets and labor costs.


Do you want to know more about the costs involved in the installation of the latest toilet?

This guide will walk you through the cost of replacing toilets which includes different toilet types costs, prices for toilets and labor costs.

How Much Does a New Toilet cost?

What options are available?

There are many aspects to take into consideration when evaluating the expense of installing a toilet such as the kind of toilet you’re planning to install and the plumbing that is currently inside your bathroom, model of cistern you’re making use of, as well as the need for preparation.

This article will give you an estimate of what it would cost to upgrade your toilet or put in an entirely new one. We’ve focused on the most crucial factors that affect the cost of your new bathroom installation, like the purchase price, other and tradesman expenses in addition to the timeline for installing the new toilet.

So, how long will it be expected to be?

In general, a toilet installation takes between 2 and 4 hours to finish. It differs based on the type that is installed, level of the job, and whether additional plumbing is needed.

The majority of one-piece toilets vary in height from 53cm up to 79.5cm (21 -31 inches) and have the rim of the bowl being 25.5cm-40.5cm (14-16 inches) and the floor height being 25.5cm-40.5cm (14-16 inches). The majority of toilets are in the range of 68.5cm to 76cm (27 -30 inches) deep.

Two-piece toilets aren’t as low as one-piece toilets, and have a total height of 66-81 cm (26 between 32 and 26 inches). The width of the toilet is rarely greater than 51cm (20 inches).

Different regions in the UK have different prices for toilets as some locations, like London, will cost more because tradespeople typically raise their prices, so the overall cost goes up.

In London the installation of a brand new toilet is priced at around £150 and then, the supplies and other materials thus the total cost will be between £150 and £300.

Other areas of the UK including northern regions, are likely to be charged between £100 and £200, however, if they require an extravagant toilet, it can also raise the cost.

What is the price average then?

The average cost of an installation of a toilet ranges between £300 to £600. The prices can vary depending on the kind of toilet you have, where you reside, and if any additional plumbing work is needed. Below is a table that will illustrate the various costs of building a new toilet.

New Toilet Prices

Close-coupled toilet£100-£200
Hidden/wall hung cistern£300-£400
Low-level cistern£150-£230
High-level cistern£150-£230
Specialist hands-free toilet£400-£500

What are the Supply Costs of a New Toilet Installation?

You might want to purchase the fittings for your toilet in order to save money. The price of constructing a new toilet is contingent on the kind that you choose. If you’re in a tight budget, you may want to consider a less expensive toilet. If you are looking for a high-end toilet, anticipate paying more than you normally would.

There are various types of toilets that are available. Each toilet comes with distinct attributes, or contributes to the look of your house. The style for the bathroom is probably the main element in determining the reason why certain toilets are more costly than other ones.

In general, single-piece wall-hung toilets cost more than other models of toilets. They are smoother and have a more elegant appearance than other models and are less prone to crevices, making them more easy to clean.

Two-piece toilets that are traditional are the most popular style and, as such, are the consequence, they are also the most affordable priced. Also, this type of toilet offers the broadest range of designs. Therefore, the cost of your toilet can increase or decrease based on the kind of toilet you pick.

Without any labor costs, close-coupled toilets are on the average around £125-£200. wall-hung toilets about £250-£400. Low-level toilets and toilets that use a cistern are priced at £125-£200, while high-level cistern toilets are priced between £150 and £250.

If you’re interested in having an uni-hands toilet it will cost between £1500 or £2000 on the toilet itself.

Close-Coupled Toilet£125-£200
Wall-Hung Toilet£250-£00
Low-Level Cistern£125-£200
High-Level Cistern£150-£250
Hands-Free Toilet£1,500-£2000

What are the Additional Costs of Installing a New Toilet?

If you’re planning to use an existing bathroom space to install the construction of a new bathroom it is possible to think about other projects at the same time. For instance, if you’ve separated the new bathroom space by a stud wall and door, you might need to revamp the decor because the new bathroom wall as well as freshly painted entrance can make the furniture appear dated and dull.

Additionally, there are times when things happen to be out of order, for instance, you could have an old home, where the heating system or water inside the house can’t be utilized by a brand new toilet, and you’ll need to build the bathroom in a brand new way.

New Bathroom

The cost of a brand new bathroom, which comprises the shower, bath and washbasin, is between £500 up to £2,000.

However the price of installation is determined mainly by the time needed to complete the task and the amount of workers who will be involved in it. Prices range between £800 to around £3000 on average.

The cost of taking out the bathroom and tile, and additional items such as taps, towel rails, sealant is the third factor to think about. The cost ranges from £600 to £2,400 on the average.

It’s also contingent on the kind of bathroom you’re looking for; the installation of an ordinary bathroom can cost between £1500 and £2000. A bathroom that is of average standard will be priced approximately £3000 and £6000 and a bathroom with exceptional quality will be priced approximately £7000 to £15,000.

Expect to pay approximately £1000 up to £3000 for a modest bathroom installation. A bathroom of a moderate size will typically cost between £3000 to £6000 however a bigger bathroom could cost as much as £10,000. The price could be significantly higher in relation to the dimensions of your bathroom as well as what kind of bathroom you’d like.


A new radiator purchased and fitted by a professional will cost between £110 to £470. A single radiator on a panel should be priced somewhere between £110 to £210 to put in. A double-panel radiator is expected to run approximately £140 or £240 to set up, and the horizontal radiator will range somewhere between £260 as well as £470 to set up.

A vertical radiator will run between £280 or £440 to put in, a column-style radiator would cost between £290 up to £470 to set up while a heated towel radiator will range somewhere between £130 or £230 to put in.

The costs don’t include removing a radiator therefore, if you wish to remove your radiator and replace it with a new one, anticipate paying about £500.

Underfloor Heating

Underfloor heating can be a beautiful alternative to radiators that are traditional, and can be put underneath virtually any kind of flooring including wood, tile, stone and carpets. The space-saving heating system will offer your home with unparalleled levels of warmth.

When using electric heat mats, anticipate paying between £50 and £75 per square meter for heating underfloor. The heater’s controls, insulation and electrical costs can influence the cost. Heating systems that are damp can cost hundreds of thousand dollars. You can expect to shell out at least £2,000 to install a complete system.

The typical day-time rate for professional installations is £300. On average, a basic underfloor heating system is approximately £800. That’s an ideal option for those who do not want to purchase the latest boiler.

Towel Radiator

The heated towel rails are cost-effective and simple to install in just a few hours. The majority of people are switching their radiators to these stylish options, which is understandable given the popularity of modern décor.

Towel radiators cost between £30 to £150 depending on the dimensions and finishes This is an option for those on a budget rather than installing a fresh bathroom or radiator.

The typical price of an installation of heated towel rails is £235 for the supplies and £225 to install, for a total price of £500.

Build and Tile a Hidden Cistern Toilet

The construction of a tile for a concealed toilet will be a cost increase between £350 and £500 as it requires additional work for tradesmen who must complete.

It also consumes many hours as the older tiles or the surrounding area needs to be completed and then let the tiles dry and set. This could sometimes take more than an entire day.

Some customers opt for sealed cisterns, which permit them to conceal their cistern. The pan is only easily accessible and visible even when the tank is concealed behind walls.

A sealed cistern can be more costly to construct because it has to be placed in a suitable position within the back of the cistern. However, accessing the cistern in case it is damaged and requires repair may be difficult to gain access to.

The bathroom contractor should have the necessary maintenance equipment, for example, a maintenance board or access tiles. This is the reason why it’s more costly because the project includes a lot more work to be done.

New Downstairs Toilet

A bathroom in the basement will help children avoid lengthy lines and accidents. The addition of a toilet can allow you to create an enjoyable, beautiful setting that impresses guests, and is essential for people who entertain regularly.

Nearly half of prospective buyers think that having a bathroom with multiple toilets is essential when buying the new house.

If you are looking to have a brand new bathroom for your downstairs The cost of installing it is between £2,000-£4,000. However, this is contingent upon many factors that can drastically alter the price.

When installing a brand new downstairs toilet, more tradespeople are required as a variety of tasks require the joiner, tiler, painter and a person to put the floor, thus the costs for labour rise because it’s an enormous task.

Removal of Existing Toilet

The removal of a toilet is a delicate job to be done cautiously. Toilets made of porcelain are brittle and may be damaged if handled improperly. The plumber will set up an earth pipe cover to safeguard the line, and make sure that there are no unpleasant odors in your home.

It’s not a tough task, but it must be performed by a professional since it involves a large number of pipes and wires that must be cut but not damaged as in the majority of cases, the new toilet can be plugged into the existing plumbing and make the task much easier.

Removal of your old toilet prior to you putting in your new one can increase the price since, on average, it can cost £75 or £100. This means that, while it’s not a huge price difference, it’s an additional cost that has to be paid.

Below, you will highlight the various charges that could impact your toilet installation costs:

Additional JobCost
New bathroom£6,000-£8,000
Radiator installation£110-£470
Underfloor heating£800
Towel radiator£150-£500
Build and tile frame a hidden cistern toilet£250-£500
Install downstairs toilet£2,000-£4,000
Removal of existing toilet£75-£100

Tradesmen Costs for Fitting a New Toilet

The cost of labor to construct a toilet is dependent on a variety of aspects, such as the kind of toilet to be installed, the extent to which plumbing work is needed and the location of your home.

The cost of labor for installing a toilet is £100 and £400. Plumbers usually bill in the range of £40 or £60 per hour. Hence, should any plumbing work be needed to set up an entirely new bathroom the cost could quickly add up.

The cost of labor for building a toilet in London is anticipated to be higher by £50-£200 than North North or other regions in the UK.

Additionally, any issues that may arise in the course of work could impact the labor costs associated with building a new toilet, as it might take longer than planned or may require an additional couple of people.

Here are a few of the problems that may arise:

  • Leaks that weren’t expected.
  • The toilet is swaying due to the flange being damaged.
  • A wrong or faulty replacement of wax seals for ring seals.
  • Leaks are caused due to poor caulking.
  • The failure to replace a leaky flush valve can be a grave error.

Tradespeople typically charge an additional cost in the range of £50 to £200 for transporting large toilets to the upstairs and away for disposal. If you reside in a house with a second story bathroom be aware of this as it can influence the total price of installing a toilet or replacement.

How Long Does It Take to Install a New Toilet?

The amount of the time needed to change a toilet is determined by the reason behind the replacement.

It’s not difficult to switch between models, but it could mean replacing a leaky or old toilet which has damaged the subfloor or flange. If this happens repairs may delay the process longer.

If repairs are needed the new toilet must have the same clearances as your previous one, so you can ensure that your waste line doesn’t require re-plumbing. It is likely that you will need a plumber and it could delay the timing.

The process of installing a toilet could take anything from up to 4 hours according to the tradesman’s degree of expertise and the kind and model of toilet being installed.

After you have installed the toilet after which you’ll have to put in the toilet seat, which could take a bit longer depending on the kind of toilet seat you’re looking for. The various types of toilets can affect the length of the work. The table below will outline the different timeframes needed to construct the toilet.

Type of ToiletTime
One-piece floor mount1.5-2 Hours
Two-piece floor mount2-2.5 Hours
Wall-mounted toilet2-3 Hours
Toilet cleaning30-40 Minutes

Choosing a New Toilet

There are a variety of toilets you should consider prior to making your final choice, according to the conditions of your house and your personal preferences. We’ve compiled some of the most commonly used toilets that may be suitable to your home.

Close Coupled Toilet Cost

They are the most traditional style of toilet, with an upright design and a visible cistern under the seat. The bowl and the cistern are closely paired in contrast to the older style in which the cistern was placed higher than the toilet, like many of the more common toilets (high-level toilets are to be covered in the future).

The flush mechanisms vary from the standard handle to the sleek chrome button, with some permitting you to regulate the flow of water. Due to the variety of styles and shapes offered, a close-coupled toilet can be installed in any bathroom with a range of styles, from simple and sleek modern toilets to classic style for traditional bathrooms.

There’s also the “completely veiled” style, where the whole toilet is positioned across the surface from top to bottom. This allows for easier cleaning, by eliminating any unwanted nooks and crevices.

Choose toilets with no rims If you’re worried about sanitation. It’s a lot simpler to clean the normal rim, since bacteria and germs don’t have a place to conceal. Toilets like these, on average, will cost between £125 and £200.


  • Classic design and incredible features
  • Over time, it is able to endure a lot of handling, excessive use and wear.


  • Cracks and settlements, as well as debris are common when people frequently use the near pair toilets over a period of time.

Back to Wall Toilet Cost

Back-to-wall toilets are the same as close-coupled toilets, with the exception that the cistern can be hidden behind the wall of a partition or part of the furniture. This type of toilet is perfect for bathrooms that are modern and can also be installed in smaller bathrooms or cloakrooms to conserve space.

If the cistern can be completely concealed behind the wall, an in-wall toilet is elegant and stylish. However, you can also choose an enclosed toilet available with a range of finishes to match your bathroom decor.

Make sure you check the concealed cistern is included when you purchase a back-to-back wall toilet, or it could be necessary to buy it separately. The typical price for these toilets is £200-£450 for purchase since they are considered to be more expensive than a closed-coupled toilet.


  • Attractive and aesthetic.
  • Due to the hidden toilet cistern, the back to wall toilet occupies less space than a traditional toilet.


  • Since these toilets are produced in smaller amounts They are also more costly. They also require an additional installation which can increase the cost of installation along with an installation kit for the wall.

Wall Hung Toilet Cost

Wall-hung toilets are the ultimate in contemporary design and function that appear to hover above the floor, without evident pedestal or cistern. With simple and sleek lines that make the most of space it is the perfect toilet for bathrooms with a modern design.

Toilets that are mounted on the wall come with soft-closing seats, and are constructed from high-quality materials designed for long-term use. To put this design inside your bathroom you’ll require a concealed cistern, as well as a wall-mounting unit.

Wall-mounted toilets typically come that have a concealed toilet as well as the frame for wall mounting. The typical range is between £200-£450.


  • Design that is elegant and minimalist.
  • Cleaning is simpler.
  • Reduced space wasted.


  • Complex installation.
  • Repairs that cost a lot.

Low-Level Cistern Toilet Cost

The low-level toilet is a classic design toilet where the cistern is erected on the wall in a separate manner from the pan, and is connected to it via the pipe.

A flush pipe usually chrome (or occasionally nickel) It can help create the appearance of a Victorian or Edwardian style when paired with a wooden-style seat.

A lever-flush handle made of white ceramic can be found in a toilet that is low-level. They’re among the cheapest ways to bring an element of elegance and style to your bathroom. It is typical for these toilets to cost between £125-£250, which can be affordable for a brand new toilet installation.


  • Modern and stylish.
  • Each Monat, water bills will be decreased by default.


  • Installing a low-level toilet is more costly than installing standard toilets.

High-Level Cistern Toilet Cost

They will cost more than a standard ‘low bathroom. To avoid looking out of place, they require more space and higher ceilings than the standard bathroom. A high-level cistern flushed with the pull chain is an essential element of this style.

The nickel or chrome flush pipe and brackets for the cistern in place, the steel chain with ceramic pull and, of course the traditional design all contribute to the bathroom’s classiness. The toilet is more costly than the standard model, which is priced between £150 to £250.


  • The toilets can be a great investment as they bring the look and feel of vintage settings.


  • Expensive

Benefits of a New Toilet

Toilets are the mainstay of the bathroom. In reality they are responsible for as much as 27 percent of your house’s total water usage.

Toilets aren’t designed to last forever. They’ll eventually require replacement in the event that a single major issue or a string of minor problems require repairs that don’t justify the cost plumbing work will cost.

These vital aspects of the bathroom’s design However, these essential elements of your bathroom’s layout are often ignored and discarded until a problem arises, for instance when the toilet is overflowing or leaks are discovered or a blockage is found.

Here are the benefits that you could reap when you install a new toilet:

More Efficient

One of the primary benefits of changing your toilet is the reduction in water consumption each day, since toilets are responsible for large proportions of your household’s water consumption.

Toilets that are brand new require 1.6 to gallons or less for each flush. Toilets constructed before the restrictions were in place can be used as much as five gallons of water per flush.

With minimal effort to your part, installing a modern, standard toilet will reduce the water consumption of your home by 23 to 46 percent. The latest ultra-low-flush or high-efficiency toilet models consume just 1.28 gallons of water per flush, which will lower the cost of water and decrease your home’s water use.

Having a Problem Free Toilet

Instead of continuing to spend time and money fixing an unreliable toilet, changing the toilet is a long-term option with one-time payments that guarantee the toilet you choose is compatible with your needs and performs in a way that is reliable for many years to come, so you don’t have to worry about breaking.

Stylish Toilet

Toilets are available in a variety of designs, from traditional rounded designs to sleek low-profile toilets which are compact enough for a space like a bathroom, or in the powder room.

If you’re replacing your toilet due to another reason, selecting one that complements the design and space available within your bathroom can give an impressive makeover which will improve its appearance, as well as possibly increasing the value of the home in the event that your plan is to eventually sell the property later on.

Bathrooms with attractive designs with appealing bathroom designs, such as attractive toilets have been proven to sell more quickly and at higher prices than those that have unappealing bathroom designs as well as unattractive or outdated toilets.

How Much Does It Cost to Remove a Toilet?

The removal of a toilet is an extremely delicate procedure that must be done with care. ceramic toilets are fragile and may break if not properly handled. The expert will put in an obstruction to the pipe that will secure the line and keep bad odours and odors from getting into your home.

It’s not a hard task, however it should be performed by a professional since a lot of pipes and wires need to be removed, but they should not be damaged. In most cases the new toilet can be installed right in and make the installation much easier.

The expense of taking out your toilet prior to installing the new one adds to the final price, which can range between £75 to £100 on an average. Sometimes, you come to a point where you require an entirely new toilet. Here are some indications to consider having an updated toilet installed.

When Your Toilet Needs to be Constantly Repaired

The occasional repair is normal however, if you need to solve toilet issues every time, it could turn into a costly and lengthy problem. It’s common to experience some or two issues with your toilet. However, if you’re consistently having the same issue, or multiple problems it’s time to consider a new toilet as an option.

Your Toilet Has a Porcelain Crack or Scratches

Porcelain cracks, even though they seem to be minor scratches, could be a major indicator that your toilet is in need of being replaced.

The accumulation of bacteria and grime may result in cracks and scratches making a clean and hygienic toilet difficult. If there are cracks in the porcelain it could lead to more serious problems than the grime. Cracks can get bigger which could lead to water leaks and damage. It also gives it the appearance of a dirty one that can be unattractive to look at.

The toilet is constantly blocked

Are you finding yourself needing to use the plunger in increasing amounts? If your toilet keeps slowing down, it’s time to think about replacing it.



  • All Post
  • Carpentry & Handywork
  • Cleaning & Housework
  • Costs
  • Damp & Insulation
  • Doors & Windows
  • Driveways & Paving
  • Electrics & Security
  • Energy & Conservation
  • Extensions & Conversions
  • Flooring & Tiling
  • Gardening & Landscaping
  • Heating & Plumbing
  • How to
  • Ideas
  • Kitchens & Bathrooms
  • Painting & Decorating
  • Uncategorized
  • windows cleaning
Turning houses into homes, one article at a time.
Recent Posts
  • All Post
  • Carpentry & Handywork
  • Cleaning & Housework
  • Costs
  • Damp & Insulation
  • Doors & Windows
  • Driveways & Paving
  • Electrics & Security
  • Energy & Conservation
  • Extensions & Conversions
  • Flooring & Tiling
  • Gardening & Landscaping
  • Heating & Plumbing
  • How to
  • Ideas
  • Kitchens & Bathrooms
  • Painting & Decorating
  • Uncategorized
  • windows cleaning
Contact Info

All Rights Reserved © 2023 HomePick

Scroll to Top